
Key Highlights
The Atlas Platinum PVL15 is an ALI CERTIFIED, commercial grade, 15,000 lb. capacity overhead two-post lift designed to accommodate both long wheel base trucks and service trucks. The Platinum PVL15 has an overall height of 174 1/2" (14' 6 1/2"), but can be extended by an extra 2 feet to accommodate taller vehicles with the Height Extension Kit. This product features an ALLY Hydraulic AL2300 Power Unit. This premium power unit is certified by MET Laboratories Inc. for electrical compliance in the United States and Canada. Extra heavy-duty armatures and more motor windings with increased silver metal included in the wires and connections create far less heat generation and allow ALLY Hydraulic power units to maintain constant torque through the lifting process. This power unit also carries an industry leading two-year limited warranty.
- 15,000 lb lifting capacity
- ALI certified commercial-grade lift
- Extra-tall and extra-wide design
- Heavy-duty symmetric lifting arms
- Professional arm lock restraint system
- Dual direct-drive hydraulic cylinders
- Padded carriage protection
- Heavy-duty 3/8" equalization cables
- Premium ALLY power unit included
- 8-piece truck adapter set included
- 4 screw-up frame adapters included
- Mounting hardware included
- Shipping weight: 2,600 lbs.
- 5-year structural warranty
- 2-year hydraulic warranty
- 2-year power unit warranty
| Capacity | 15,000 lbs. |
| Overall Height | 174 1/2" (14' 6 1/2") |
| Overall Floor Width | 148" (12' 4") |
| Outside Column to Outside Column | 135" (11' 3") |
| Maximum Lift Height (Without Adapters) | 72 3/4" |
| Maximum Lift Height (With Adapters) | 87 1/2" |
| Minimum Arm Height | 6" |
| Shipping Weight | 2,600 lbs. |
| Inside Column Width | 119 1/4" (9' 11 1/4") |
| Drive Thru Width | 107 1/2" (8' 11 1/2") |
| Column Size | 8" x 14 1/2" |
| Base of Lift | 21" x 48" |
| Motor / Electrical Requirement | 220 Volt Single Phase (30 AMP Breaker Recommended) |
| Oil Requirement | 3-5 Gallons AW32/AW46 (Not Included) |
| Adapter Heights | 4 Each 5", 10" |
| Arm Hole / Adapter Peg Size | 2.75" |
| Concrete Requirement | Minimum 6" Thick, 3000 PSI Concrete |
See It Before
You Buy It